Skip to content

Test your mic and camera before your webinar

Press Start, allow the camera and microphone, and you will see yourself and a live mic level. The test runs only in your browser: nothing is recorded, and no audio or video leaves your device.

You should hear a short beep. No beep? Check the volume and the output device.

Camera

Microphone
Microphone level

Everything runs in your browser. Nothing is recorded, and no audio or video leaves your device.

What the test checks

  • Camera: that the browser can open it, what you look like on it, and the picture size and frame rate it sends.
  • Microphone: a live level bar. Talk at your normal volume: the bar should move and turn green.
  • The right device: after you allow access, the lists show every camera and microphone the browser can see, so you can pick the one you will present with.
  • Speakers: the test sound plays a short beep on your output device.

If the camera or mic does not work

  • Blocked: click the camera or lock icon in the address bar and allow the camera and microphone. On a Mac, also open System Settings, Privacy & Security, then Camera and Microphone, and allow your browser. On Windows, open Settings, Privacy & security, then Camera and Microphone.
  • In use by another app: a meeting app, a recording app or another tab can hold the camera. Close it and press Try again.
  • The bar does not move: check the mute switch on your headset or microphone, the input volume in your computer's sound settings, and that the right microphone is picked in the list.
  • Bluetooth headsets: many switch to a lower-quality call mode while their microphone is in use. A wired headset or a USB microphone avoids that.

Before you go live

  • Sit facing the light, not with a window behind you.
  • Put the camera at eye level.
  • Wear headphones so your speakers do not echo into the microphone.
  • Close the apps and tabs you will not need during the session.
  • Run this test in the same room and the same browser you will present from.

Questions about the mic and camera test

Is this mic and camera test free?

Yes. There is no sign-up and no limit. Open the page, press Start, and the test runs in your browser.

Do you record or store my video or voice?

No. The camera picture and the mic level stay in your browser tab. Nothing is recorded, uploaded or saved, and stopping the test or closing the page turns the camera and microphone off.

Why does my browser ask for permission?

Browsers never open a camera or microphone without asking. Choose Allow to run the test. If you chose Block before, click the camera or lock icon in the address bar to allow it again, then press Start.

My camera works here but not in my webinar. Why?

Check that the webinar tool uses the same camera and microphone (most have a settings menu for it), that no other app is holding the camera, and that the same browser is allowed to use them on that site.

Which browsers does the test work in?

Recent versions of Chrome, Edge, Firefox and Safari, on computers and phones. Browsers only open a camera on a secure page (https), which webinly.com always is.

Run your webinar from the same browser

In Webinly you broadcast from the browser, and co-hosts and attendees join from theirs, so nobody installs anything. Live broadcasting is on the Pro and Scale plans.